Quadro SW-Version 4.1.x Bedienungsanleitung Seite 2

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 24
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 1
Epygi Technologies Release Note Quadro2x 5.2.48, Edition 3
versions support 5.2.x: SASY-MICRO-0101-0002, SASY-MICRO-0101-0101, SASY-MICRO-0102-
xxxx, SASY-MICRO-0103-xxxx
Additional details are provided in Section 7: Upgrading Instructions
2.2 Software requirements
Attention: The software upgrade to 5.2.x can ONLY be done from 5.1.38 and higher 5.1
versions. Before updating to 5.2.48 the unit should be updated to 5.1.38 or higher 5.1 version
first.
2.3 Supported and Tested SIP phones
Below is the list of SIP phones with the corresponding firmware versions that are supported by
Epygi and are recommended for optimal compatibility with Quadro2x.
Vendor
Model Software
snom 300 Application: snom300-SIP 8.4.32
snom 320 Application: snom320-SIP 8.4.32
snom 360 Application: snom360-SIP 8.4.32
snom 370 Application: snom370-SIP 8.4.32
snom 820 Application: snom820-SIP 8.4.32
snom 821 Application: snom821-SIP 8.4.32
snom 870 Application: snom870-SIP 8.4.32
snom MeetingPoint Application: snomMP-SIP 8.4.32
Aastra 480i Application version: 1.4.3.23
Aastra 480iCT Application version: 1.4.3.23
Aastra 9112i Application version: 1.4.3.23
Aastra 9133i Application version: 1.4.3.23
Aastra 9143i (33i) Application version: 2.5.2.1010
Aastra 9480i (35i) Application version: 2.5.2.1010
Aastra 9480iCT (35iCT) Application version: 2.5.2.1010
Aastra 6751i Application version: 2.5.2.1010
Aastra 6753i Application version: 2.5.2.1010
Aastra 6755i Application version: 2.5.2.1010
Aastra 6757i Application version: 2.5.2.1010
Aastra 6757iCT Application version: 2.5.2.1010
Aastra 6730i Application version: 2.5.2.1010
Aastra 6731i Application version: 2.5.2.1010
Please Note: Any problems and limitations on the SIP phones listed below are described in detail
in the Quadro Features on Supported IP Phones document.
Please Note: Quadro IP phones firmware control mechanism will not upgrade snom firmware
version from 6.x to 7.x. This should be done manually via snom web site. Once the snom
firmware version is 7.x, the Quadro’s firmware control will automatically upgrade/downgrade the
phone to Epygi’s recommended version but not to 6.x.
In the list below are the SIP phones with the corresponding firmware versions that are tested by
Epygi. The document Quadro Features on Tested IP Phones describes the problems and
limitations on the SIP phones that have been tested by Epygi.
PAGE 2 26-Dec-11
Seitenansicht 1
1 2 3 4 5 6 7 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare